Conservation of cultural heritage – Transport methods

BS EN 16648

Conservation of cultural heritage – Transport methods

This standard outlines the requirements and recommendations for the safe and secure transportation of cultural heritage, in accordance with BS EN 16648:2015. It establishes consistent procedures, defines responsibilities and identifies the key stages involved in transporting cultural objects using appropriate methods.

Introduction

Increases in the worldwide mobility of cultural heritage and the emergence of new participants have had significant consequences on packing and transport.  There have been several initiatives to regulate all aspects of collection mobility. Therefore the need to structure and harmonise packing and transport practices and to define responsibilities has become more important than ever.

Transportation of cultural heritage requires an appropriate range of knowledge, skills and competencies of those involved in the process.  This European Standard is the result of a collaboration of a large range of professionals from most European countries. It is intended for all parties involved in the transport of cultural heritage.

This European Standard defines the successive steps of moving objects, using relevant means of transport.  This European Standard lists requirements (the word shall is used) and provides recommendations (the word should is used) for the safe and secure transport of cultural heritage.

Implementation

Some elements of the standard are mandatory, i.e. the standard says that certain measures “shall” be carried out and sometimes the exact requirement is specified. During audit by the certification company, any shortcoming against those will result in a “nonconformity” which will have to be remedied before a certificate is issued.

In other areas, the standard is less prescriptive and there are recommendations for best practice. When assessing a company’s performance against those, an auditor can show greater flexibility and if there is room for improvement the report will include appropriate recommendations and these will be followed up during the next year’s audit.

BS EN 16648 was written by persons with experience and understanding of the industry and a well-run transport company should find it easy to follow and should not have any difficulty interpreting and implementing the requirements.

Scope

This European Standard defines principles to be considered when transporting movable cultural heritage in accordance with BS EN 15946.

The standard is comprised of the following sections:

5 General principles

6 Before transport

6.1 Risk assessment

6.2 Qualifications of the transport agent

6.3 Requirements of the owner/custodian

6.4 Transport planning and co-ordination

6.5 Insurance/indemnity cover

6.6 Drafting of a contract

6.7 Content of the transport file and the couriering file

7 Transport methods and environment

7.1 Choice of the mode of transport

7.3 By road

7.4 By air

7.5 By rail

7.6 By sea

8 Warehouse for objects in transit

Annex A – role of the courier (further guidance)

Annex B – information to be communicated to the transport agent (further guidance)

Annex C – specifications of a secure building/warehouse for objects in transit (further guidance)

What costs are involved?

In order to understand the requirements, you must first acquire your own licenced copy of the standard.  QSS are an authorised BSI standards distributor and can save you money on the purchase cost of the standard if ordered through QSS – please contact us for more information on this.

You then need to budget costs for implementing the standard within your business prior to initial assessment.  You may wish to do this yourselves or you may engage an appropriately qualified and experienced independent consultant who can quote to assist you through the preparation process.

When a transport company engages QSS (Quality Service Standards Ltd) to carry out its assessment and certification processes, an “Initial Assessment” will be carried out by QSS to audit the company’s compliance against the entire standard. Following this (and subject to the clearance of any nonconformities) a certificate will be issued, usually valid for 12 months.  Annual surveillance assessments are then carried out, each covering certain elements of the standard and normally leading to renewal of certification for a further 12 months (subject to any nonconformities).

Costs for this can be obtained by contacting David Woodhouse, QSS General Manager at:

Quality Service Standards Ltd.,
Unit 3, The Progression Centre, Mark Road,
Hemel Hempstead, HP2 7DW

T: +44 (0)1923 699840
E: admin@qssonline.co.uk

For more information

Call +44 (0)1923 699840 or
email admin@qssonline.co.uk

© Quality Service Standards Ltd. Registered in England & Wales, No. 03804633. Registered Address: Unit 3, The Progression Centre, Mark Road, Hemel Hempstead, HP2 7DW.